Software overview
NOTE: the operation of the S800 requires access to the S800 software account. If you need access to this account, contact Jorge Pereira (pereira@frib.msu.edu).
Computers used
u4pc8 (data U4)
Use: s800 operation. NOTE: The use of this computer should be supervised by the corresponding Device Physicist
Location: desk on the west side of data-U4
Operating system: Linux
S800 account: s800
Password: (please contact Jorge Pereira (pereira@frib.msu.edu))
S800 applications:
-
SpecTcl Please, be aware that SpecTcl is the official analysis software used during XDT
-
Hourlog: This is the online logbook used by operators. It can be only accessed by members of the operations department and device physicists (accessed by clicking in the icon “Hourlog” in the u6pc5 desktop or by going to
https://intra-gw.nscl.msu.edu/hourlog)
spdaq50 (S3 vault)
NOTE: This computer was installed on May 2017 to replace spdaq19
Use: main acquisition computer by both s800 and experimenter account. NOTE: The use of this computer should be supervised/coordinated by the corresponding Device Physicist
Location: in the S800 electronics rack, near the S800 FP (top level)
Operating system: Linux
S800 account: s800
Password: (please check the S800 binder that is kept in the data-U1 logbook cabinet)
S800FP-PC (S3 vault)
Use: control of FP scintillator bias and control of FP remote gas handling systems (CRDCs and Ion chamber)
Location: top level in east FP electronics rack. This computer can be accessed remotely from the desktop of computer
u6pc5, by clicking in the icon
S800 Vault PC.
Operating system: Windows
S800 account: s800
Password: (please check the S800 binder that is kept in the data-U1 logbook cabinet)
ctl-s3 (S3 vault)
Use: control and diagnostics of hardware systems
Location: on middle level in power supply racks under stairs to top level
Operating system: Window
Account: e.g., vaultuser
Password: (ask operators in Control Room, phone ext. # 305)
u6pc1 (data U6)
u6pc2, u6pc3, u6pc4 (data U6)