Differences

This shows you the differences between two versions of the page.

--- to-do_list [2018/05/02 16:36]
pereira [In data U6]
+++ to-do_list [2019/03/13 21:24]
pereira [In data U6]
@@ Line 29: / Line 29: @@
-  * Verify that **stagearea** in u6pc5 is pointing to the right place. After typing ''ls -l ~/stagearea'' in a u6pc5 terminal, you should see: **/user/s800/stagearea -> /mnt/daqtesting/s800/exxxxx**, where xxxxx corresponds to the experiment number. If the experiment number is not right, contact S800 Device Physicist.
+  * Verify that **stagearea** in u6pc5 is pointing to the right place. After typing ''ls -l ~/stagearea'' in a u6pc5 terminal, you should see: **/user/s800/stagearea -> /mnt/events/operations/s800/exxxxx**, where xxxxx corresponds to the experiment number. If the experiment number is not right, contact S800 Device Physicist.
   * Set S800 DAQ in [[s800 daq tools#Running in Slave mode with multilogger |Slave mode and enable multilogger]] to record S800 data in the s800 stagearea.
@@ Line 44: / Line 44: @@
   * [[Magnetic-rigidity setting|Set spectrograph Brho]] (coordinate with experimenters)
+===== At the end of the experiment =====
+  * Verify with S800 Device Physicist that S800 DAQ software is uninstalled. This can be done by typing script ''gouninstalldaq'' (please, contact Device Physicist if you are not sure of what you're doing)
+  * Unbias detectors, CRDC interface boards, CRDCs gate, etc
+  * [[Gas handling system|Remove gas]] from CRDCs and Ion Chamber

S800 Documentation