S800 Documentation

User Tools

Site Tools

Trace:
to-do_list

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
to-do_list [2023/09/22 11:27]
swartzj [In data U4] 		to-do_list [2023/10/19 17:12]
swartzj
Line 7: Line 7:
   * [[Installation FP SCI|Install the focal-plane scintillator]] with the right thickness (1mm or 5mm)   * [[Installation FP SCI|Install the focal-plane scintillator]] with the right thickness (1mm or 5mm)
  
-  * Ensure that the object scintillator is in good conditions and has enough shimming positions to withstand the expected rates during the course of the experiment. The guideline document describing the installation and shimming procedure can be accessed [[https://docmgmt.nscl.msu.edu/share/page/site/NSCL/document-details?nodeRef=workspace://SpacesStore/cad088ca-6d41-4025-b010-8e620806a48b|here]] +  * Ensure that the object scintillator is in good condition and has enough shimming positions to withstand the expected rates during the course of the experiment. The guideline document describing the installation and shimming procedure can be accessed [[https://docmgmt.nscl.msu.edu/share/page/site/NSCL/document-details?nodeRef=workspace://SpacesStore/cad088ca-6d41-4025-b010-8e620806a48b|here]] 
    
   * [[Turning magnets on off#Arming of Dump Switch|Arm dump switches]]   * [[Turning magnets on off#Arming of Dump Switch|Arm dump switches]]
Line 40: Line 40:
  
   * ''$ ~/bin/goinstalldaq/'' and follow the script instructions.   * ''$ ~/bin/goinstalldaq/'' and follow the script instructions.
-  * The script should relink **stagearea** to the right place, provided that the proper experimental number is given. After typing ''ls -l ~/stagearea'' in a u4pc1 terminal, you should see: **/user/s800/stagearea -> /mnt/events/operations/s800/exxxxx**, where xxxxx corresponds to the experiment number. If the experiment number is not right, contact S800 Device Physicist.+  * The script should relink **stagearea** to the right place, provided that the proper experimental number is given. After typing ''ls -l ~/stagearea'' in a u4pc8 terminal, you should see: **/user/s800/stagearea -> /mnt/events/operations/s800/exxxxx**, where xxxxx corresponds to the experiment number. If the experiment number is not right, contact S800 Device Physicist.
  
 === Set S800 DAQ mode === === Set S800 DAQ mode ===
to-do_list.txt ยท Last modified: 2023/10/19 17:15 by swartzj

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki