User Tools

Site Tools


tuning_the_s800_xdt

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tuning_the_s800_xdt [2019/03/13 21:20]
pereira
tuning_the_s800_xdt [2019/03/13 21:22] (current)
pereira [Checking Particle ID and rate at S800 FP]
Line 235: Line 235:
       * Measure the beam intensity again and calculate the average value       * Measure the beam intensity again and calculate the average value
       * In [[s800 SpecTcl|SpecTcl GUI]], click **Attach to File** and select data file **run-xxxx-xx.evt** in directory **/​user/​s800/​stagearea/​experiment/​runxxxx**,​ where xxxx stands for the run number       * In [[s800 SpecTcl|SpecTcl GUI]], click **Attach to File** and select data file **run-xxxx-xx.evt** in directory **/​user/​s800/​stagearea/​experiment/​runxxxx**,​ where xxxx stands for the run number
-      * Check the run time and live time from the corresponding scaler file in directory **/​user/​s800/​converged_daq/scalers**+      * Check the run time and live time from the corresponding scaler file in directory **/​user/​s800/​s800daq/scalers**
       * Calculate the rate and purity and compare with the value in the A1900 FP to determine the transmission       * Calculate the rate and purity and compare with the value in the A1900 FP to determine the transmission
  
tuning_the_s800_xdt.txt ยท Last modified: 2019/03/13 21:22 by pereira