User Tools

Site Tools


turning_magnets_on_off

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
turning_magnets_on_off [2017/05/26 15:37]
pereira [Arming of Dump Switch]
turning_magnets_on_off [2019/05/15 11:58] (current)
pereira
Line 20: Line 20:
  
 The dump switches of the first and second dipoles are located on the bottom and middle level of S3. The dipole magnet is ready to be turned on when the front panel of the dump switch box shows the red label "closed". The two pictures below show the dump-switch control "open" (not ready to be turned on) for the second spectrograph dipole. A label in the control box explains how to arm the switches.  The dump switches of the first and second dipoles are located on the bottom and middle level of S3. The dipole magnet is ready to be turned on when the front panel of the dump switch box shows the red label "closed". The two pictures below show the dump-switch control "open" (not ready to be turned on) for the second spectrograph dipole. A label in the control box explains how to arm the switches. 
 +
 +In case the dump switches need to be open, make sure that the power supplies are turned off. Then, rotate the small trip handle to the "open" position.
  
  
turning_magnets_on_off.txt ยท Last modified: 2019/05/15 11:58 by pereira