Differences

This shows you the differences between two versions of the page.

--- usb_data_acquisition_setup_guide [2016/03/16 15:42]
pereira
+++ usb_data_acquisition_setup_guide [2016/03/16 15:49]
pereira
@@ Line 11: / Line 11: @@
 The data streams coming from the various crates are synchronized and combined into a single stream by the Event Builder designed by the NSCL DAQ group. Detailed information about the Event Builder can be found [[http://docs.nscl.msu.edu/daq/newsite/nscldaq-11.0/c4456.html|here]].
-The time-ordered data from the Event Builder is sent to the ring buffer **s800built**, which is then read by the S800 Event Filter. This program makes some integrity-checks of the data and assembles them into NSCL standard buffers, which are sent to the ringbuffer **s800filter**. Users need to connect to this ringbuffer to analyze the experiment data (using e.g. SpecTcl).
+The time-ordered data from the Event Builder is sent to the ring buffer **s800built**, which is then read by the S800 Event Filter. This program makes some integrity-checks of the data and assembles them into NSCL standard buffers, which are sent to the ringbuffer **s800filter**. Users need to connect to this ringbuffer to analyze the experiment data (using e.g. SpecTcl). The format of the data distributed by the S800 Filter is described [[Event Filter|here]].
 The location of the different script files and filter program will be published in the near future.

S800 Documentation