Differences

This shows you the differences between two versions of the page.

--- venting_pumping_intermediate_image_box [2024/01/12 09:37]
noji [Filling and Running Detectors]
+++ venting_pumping_intermediate_image_box [2024/01/12 09:37] (current)
noji [Filling and Running Detectors]
@@ Line 69: / Line 69: @@
   - Be sure to go back to S3 and close the manual valve.
 ===== Filling and Running Detectors =====
-  - If in Vent Mode, click **PUMP** then click **RUN** to enter Run Mode. The valves #1 and #3 will be open (#6 will be closed).
+  - If in Vent Mode, click **PUMP** then click **RUN** to enter Run Mode. The valves #1 opens and #3 remains open (#5 and #6 will be closed, and the GHS lines will be isolated from the chamber).
   - If in Pump Mode, click **RUN** to enter Run Mode.
   - Plot and monitor IG_D2430:VP_RD while filling. Ion gauge reading will increase but should remain <1E-5 Torr when PPACs are running at full pressure.

S800 Documentation