AT-TPC Wiki

User Tools

Site Tools

Trace:
microtca_development

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
microtca_development [2014/01/16 14:15] – abunimehmicrotca_development [2014/01/16 14:17] (current) – abunimeh
Line 1: Line 1:
-=== VadaTech UTC002 10 GbE to 1 GbE mode ===+==== VadaTech UTC002 10 GbE to 1 GbE mode ====
 {{ :cobo_mch_network.png?500|CoBo network access}} {{ :cobo_mch_network.png?500|CoBo network access}}
 CoBo (and its FRU) is designed to have two physically independent 1GbE connections to AMC PORT0 and PORT4. VadaTech 10GbE switch (connected to AMCs PORT 4) inside UTC002 has to be configured to allow its 10GbE ports to accept 1GbE (only) connections. Therefore, in order for CoBo 1GbE connection (on PORT4) to work on VadaTech's UTC002 10GbE switch the following has to be performed (once): CoBo (and its FRU) is designed to have two physically independent 1GbE connections to AMC PORT0 and PORT4. VadaTech 10GbE switch (connected to AMCs PORT 4) inside UTC002 has to be configured to allow its 10GbE ports to accept 1GbE (only) connections. Therefore, in order for CoBo 1GbE connection (on PORT4) to work on VadaTech's UTC002 10GbE switch the following has to be performed (once):
Line 60: Line 60:
 </code> </code>
  
-=== VadaTech UTC008 JSM (JTAG) ===+==== VadaTech UTC008 JSM (JTAG) ====
 For debugging purposes it is useful to connect the JTAG port on a CoBo installed in a chassis to your workstation. VadaTech's JSM makes this process easier. For debugging purposes it is useful to connect the JTAG port on a CoBo installed in a chassis to your workstation. VadaTech's JSM makes this process easier.
  
 1- Connect your JTAG Xilinx platform cable USB to the JSM module 1- Connect your JTAG Xilinx platform cable USB to the JSM module
 +
 2- Copy the script below to a local file 2- Copy the script below to a local file
 <code> <code>
Line 182: Line 183:
 </code> </code>
 3- chmod +x connectCoBo.sh 3- chmod +x connectCoBo.sh
 +
 4- ./connectCoBo.sh 1 4- ./connectCoBo.sh 1
 +
 5- or to download an fpga bit file ./connectCoBo.sh 1 myfile.bit 5- or to download an fpga bit file ./connectCoBo.sh 1 myfile.bit
 +
 6- follow the prompt when asked to set the CFG and FTM_REQ switches 6- follow the prompt when asked to set the CFG and FTM_REQ switches
 +
  
microtca_development.1389899717.txt.gz · Last modified: 2014/01/16 14:15 by abunimeh