====== Conceptual Design Report ====== You must write each part you are responsible for,following the template below. To help you, two examples of CDR are exposed. One deals with the T2K experiment. One other deals with a design write up for a neutrino telescope. Both could give you a good idea of what information needs to be input into the CDR. {{T2K-CDR.pdf|T2K experiment CDR}}.\\ {{KM3net.pdf|KM3net CDR}}.\\ CDR template versionning:\\ {{GET-CDR.doc| template for Office2007}}.\\ {{GET-CDR98.doc | template for Office98-2003}}.\\ __**//METHODOLOGY OF WRITING//**__ Below is displaying the template of the CDR. When you contribute to a special part, input a link to your paragraph (.doc file), type your name, your laboratory, and the date of creation and modification. Saclay will collect all parts to put together in a complete document. 8-)8-O8-o:-(:-):-/:-/:-\:-D:-D;-)\\ **example :**\\ **name :** Frederic Druillole \\ **Institute :** CEA-Saclay IRFU \\ **email :** frederic.druillole@cea.fr \\ **part link to :** Intro.doc \\ **modified date :** 20/07/09 \\ 8-)8-O8-o:-(:-):-/:-/:-\:-D:-D;-)\\ ===== Contents ===== ==== 1. Introduction ==== === 1.1. Scientific Objectives === === 1.2. Ion beam interaction in gases === === 1.3. Events signature === === 1.4. Electronic and physics history === ==== 2. Scientific Cases ==== === 2.1. For Actar === name: Riccardo Raabe Institute: GANIL email: raabe@ganil.fr file: {{:get-cdr98_riccardo_2.1_2.3_2.5.doc|:get-cdr98_riccardo_2.1_2.3_2.5.doc}} Modified: 19/10/09 === 2.2. For AT-TPC === === 2.3. For 2p-TPC === name: Riccardo Raabe Institute: GANIL email: raabe@ganil.fr file: {{:get-cdr98_riccardo_2.1_2.3_2.5.doc|:get-cdr98_riccardo_2.1_2.3_2.5.doc}} Modified: 19/10/09 === 2.4. For Samouraï TPC === === 2.5. For Detector R&D === name: Riccardo Raabe Institute: GANIL email: raabe@ganil.fr file: {{:get-cdr98_riccardo_2.1_2.3_2.5.doc|:get-cdr98_riccardo_2.1_2.3_2.5.doc}} Modified: 19/10/09 ==== 3. General concept and overview ==== === 3.1. System Overview === === 3.2. Physics requirements === name: Riccardo Raabe, Lolly Pollacco Institute: GANIL, Saclay email: raabe@ganil.fr, emmanuel.pollacco@cea.fr file: {{:get-cdr98_riccardo_3.2_3.4.doc|:get-cdr98_riccardo_3.2_3.4.doc}} Modified: 19/10/09 === 3.3. Performances === === 3.4. Trigger policies === name: Riccardo Raabe, Lolly Pollacco Institute: GANIL, Saclay email: raabe@ganil.fr, emmanuel.pollacco@cea.fr file: {{:get-cdr98_riccardo_3.2_3.4.doc|:get-cdr98_riccardo_3.2_3.4.doc}} Modified: 19/10/09 === 3.5. Clock Management === ==== 4. Information Technology ==== === 4.1. Data Acquisition Model === === 4.2. Hardware Objects === == 4.2.1 AGET : Front end Asic == name: Pascal Baron Institute: CEA/DSM/IRFU/SEDI email: pascal.baron@cea.fr file: {{CDR_AGET.doc}} Modified: 01/10/09 == 4.2.2 Front End Card == == 4.2.3 Data Concentration Board == name: Nathan Usher Institute: NSCL/MSU email: usher@nscl.msu.edu file: {{CDR_4.2.3.doc}} Modified: 19/08/09 == 4.2.4 Trigger system and Clock distribution == name: Gilles Wittwer Institute: CEA-CNRS/GANIL email: wittwer@ganil.fr file: {{CDR_MUTANT_BEM.doc}} Modified: 19/10/09 === 4.3. Data Acquisition and Processing System === == 4.3.1 Real Time Acquisition == == 4.3.2 Slow control Model == == 4.3.3 Run Control Model == ==== 5. Mechanics ==== === 5.1. Mechanics near Detectors === == 5.2. Back end Mechanics == === 5.3. Thermal dissipation === === 5.4. Electro-magnetic compatibility === === 5.5. Positioning === ==== 6. Calibration ==== === 6.1. Electronics Calibration === === 6.2. Physic Calibration === ==== 7. Safety and system monitoring ==== === 7.1. Overview === === 7.2. Safety and Monitoring Model === === 7.3. Monitoring Parameters === === 7.4. Hardware concept === === 7.5. Software concept === ==== 8. Development Plan ==== === 8.1. Timeline and Decision Path === === 8.2. Operational issues === === 8.3. Political, Legal and strategic aspect === ==== 9. GLOSSARY ==== ==== 10. BIBLIOGRAPHY ==== ==== 11. Annexe 1: ====