====== CoBo Front Panel ====== * 2 Dual VHDCI Connectors (LVDS,LVCMOS3.3V) (compatible cable [[http://www.cablesondemand.com/category/CSVHDCI/product/CS-VHDCIMX200/URvars/Items/Library/InfoManage/CS-VHDCIMX200.htm|Amphenol CS-VHDCIMX200-003]]) * 2 Dual LEMO Connectors (LVCMOS 3.3V/TTL 5V) [[http://intra.lemo.ch/PartSearch?part=EPY.00.250.NTN|LEMO EPY.00.250.NTN.]] * 1 Micro-USB (USB UART) (compatible cable [[http://www.digikey.com/product-search/en?vendor=0&keywords=WM17145-ND|Molex 0687840001]]) * 4x4 LEDS (X0 LEDs are for Asad0, X1 LEDs are for Asad1, etc) * P = Asad **P**lugged * ON: Asad plugged in * OFF: No Asad plugged * Slow Blink: (configuration dependent?) * Fast Blink: ? * B = **B**ad * ON: Major error. Typically needs user intervention. Power supply error? unresponsive to slow control or reset. * OFF: no errors * Slow Blink: Slow control errors e.g. AGET controller busy, etc. * Fast Blink: bad data frames. * U = CoBo-Asad **U**plink activity i.e. from CoBo to Asad * ON: ? * OFF: no activity * Slow Blink: minor traffic * Fast Blink: major traffic * D = CoBo-Asad **D**ownlink activity i.e. from Asad to CoBo * ON: All or 3 Asads sending data * OFF: no data from asad * Slow Blink: slow control replies * Fast Blink: 2 or less Asads sending data * 3 MicroTCA LEDS * Blue = Hot swap * Green = OK * Red = Bad ====== CoBo 0.2v (Prototype) ====== {{ ::cobo_fp02.png?500 |}} ====== CoBo 1.0v (Production) ====== The difference between the two front panels is the arragement of LEMO connectors {{ ::cobo_fp10.png?500 |}} ====== CoBo 0.2v Front Panel (Prototype) ====== {{ ::cobo02_2.png?500 |}}