====== Hardware Requirements ======
  * µTCA crate equipped with MCH, JTAG modules, 1KW power supply
  * CoBo v1.0 AMC
  * 4 x AsAd boards, 4 x VHDCI cables and 4 x power cables
  * Power supply 3.6V 6A minimum for Asads
  * PC running Fedora, connected via Ethernet to MCH
  * Xilinx JTAG programmer USB brick
  * Micro-USB cable


====== Software Requirements ======
  * NXP LPC chip should be flashed with VadaTech software
  * FRU and SDR should have correct values
  * Xilinx v14.7 tools should be installed on PC (xmd)
  * GetController software suite should be installed on PC
  * PC needs to run some version of DHCP server (dnsmasq), as well as NFS server.

====== Power ======
Click on Image below to see voltage test points.

{{:cobov1.0_voltages_ann.png?direct&100|}}
====== LEDs ======
====== UART ======
====== Clocks ======
====== Memory ======
====== Stability ======
====== FRU & SDR ======
====== Ethernet ======
====== GET testing ======
====== Mechanical ======