cobo_testing
This is an old revision of the document!
Table of Contents
Hardware Requirements
* µTCA crate equipped with MCH, JTAG modules, 1KW power supply * CoBo v1.0 AMC * 4 x AsAd boards, 4 x VHDCI cables and 4 x power cables * Power supply 3.6V 6A minimum for Asads * PC running Fedora, connected via Ethernet to MCH * Xilinx JTAG programmer USB brick * Micro-USB cable
Software Requirements
* NXP LPC chip should be flashed with VadaTech software * FRU and SDR should have correct values * Xilinx v14.7 tools should be installed on PC (xmd) * GetController software suite should be installed on PC * PC needs to run some version of DHCP server (dnsmasq), as well as NFS server.
Power
LEDs
UART
Clocks
Memory
Stability
FRU & SDR
Ethernet
GET testing
Mechanical
cobo_testing.1418061877.txt.gz · Last modified: 2014/12/08 13:04 by abunimeh