Differences

This shows you the differences between two versions of the page.

--- daq:daq [2012/07/01 07:56]
weisshaa [Status]
+++ daq:daq [2023/11/03 16:36]
weisshaa
@@ Line 1: / Line 1: @@
-GRETINA DAQ system
+======= FRIB online build window ======
-====== issues ========
+Issue the following command prior to starting the ReadoutGUI: export COINCIDENCE_TICKS=300
-ANY issue/breakdown put here: [[:daqtrouble|daqtrouble]]
-====== start procedures ======
-  * [[GRETINA:GRETINA]]
+======= New in 2022 ======
-  *[[s800daq:s800daq]]
+start run window is obsolete. Two scripts are available for changing the data directory. Daq needs to be stopped, directories need to exist:
-  *[[source measurement:source measurement]]
+  * changeDataDir_maintainRunNum  <data dir>  : keeps the Run number the same, for when we need to move physics experiment data collection to another disk
-  * S800 monitor [[https://groups.nscl.msu.edu/opdevtech/wiki/index.php/S800_DAQ_status_tool|S800mon]]
+  * changeDataDir_resetRunNum <data dir>  : finds the lowest available Run number without any larger RunDir #s
-====== Status ======
-[[:status|status]]
-====== Status 6/21/2012 ======
+======= This is DAQ page from previous campaigns ======
+The DAQ page from the former S800-GRETINA campaign in 2012 can be found at
+https://wikihost.nscl.msu.edu/gretina/doku.php/daq:daq_2012
-__Radial boxes:__
+  * S800-Gretina control [[docsS800Grt|docsS800Grt]]
-  * SN 005207 - over current
+  * {{ :daq:ulm-e16011_names.png?linkonly |S800 Trigger GUI}}
-  * SN 005222 - over current
+======= Troubleshoot ======
-  * SN 005215 - bad resolution cable 1 ch 4
+  * S800-Gretina not correlated: Check CC setfile ~s800/converged_daq/Scripts/CC0105Begin.tcl for extsynch and extclock
-  * SN 005202 - broken screw
+  * S800 is losing events. Check the network speed of spdaq32 by /sbin/ethtool eth0 and /sbin/ethtool eth1 , both should show speed as 1000Mb/s, if one shows 100Mb/s then the network is too slow and S800 cannot send data to GEB fast enough which will cause event loss happen.
+  * Check the ringbuffer status, $DAQBIN/ringbuffer status - -host=spdaq32 - -all , if the free colum becomes zero, DAQ related people needs to be notified for diagnostics.
-Spares available: 1 (only for Q1)
+======= Decomp Information ======
+  * [[easy_decomp_calibrations|Easy Gretina Decomp File Creation]]
+  * [[decomp_calibrations|Gretina Decomp Calibrations Explanation]]
+======= Gretina Computing =======
+Gretina computer farm is maintained by LBNL computer group and local NSCL IT department. Nonetheless I put documents here, but we do NOT do anything to the GRETINA computers!
-====== Status 6/20/2012 ======
+  * May 2019, documentation provided from Jackie: [[https://docs.google.com/document/d/1Aq5NkuEKBc4_5fx-95d2RaSZM08VQwVleYWr42QTsFg/edit?invite=CNr_nogM&ts=5cd488d9|Gretina System Documentation]]
+  * Instruction to shut down switches for NSCL power shutdown 12/5/2015 {{:daq:gretinaswitchesshutdown.pdf|}}
-Northern hemisphere is working nicely, all channels  are there, showing good resolution in all segments.
+======= NSCL GRETINA LaBr Array =======
-====== Status 6/18/2012 (Preliminary) ======
+    * [[fastscint_daq| FastScint DAQ Quick Start]]
+    * [[fastscint_daq_long | FastScint DAQ Details]]
-__Channels:__
+======= Misc 2019 ======
-  * Q1 ok
+  * Dual homed NSCL machines are spdaq32 and spdaq07
-  * Q2P3a3 15 keV resolution (microphony?))
-  * Q3 gamma lab
-  * Q4P2e1 - grounded in the detector
-  * Q5P3 and Q5P4 neutron damage / microphony visible in many segments
-  * Q6 ok
-  * Q7 ok
-==== Files/trees on GRETINA cluster to go ====
+====== miscellaneous ======
-(Only to be done by Dirk)
+  * Validation/Trigger window width is set by Dig116_CS_X55WidthP, Dig116_CS_X55WidthN. N/P stands for positive/negative maximum difference relative to Trigger timestamp which will be read out.
+  * Bringing up just the EPICs screen: in gretina home **./startGRETINA_EPICSdisplay**
+  * Set trigger multiplicity: **caput Trig0_CS_FSCThr n** (n=0,1,2,3... for mult 1,2,3,4...)
+  * See trigger pulse width: **CheckLED.sh**
+  * Change trigger pulse width: **SETLEDWIN <# of 20ns ticks>**
+  * Check timestamps, report boards that are out-of-sync: **CheckTS**
+  * Force timestamps to reset, DO NOT USE DURING RUN!!!: **SINGLEIMPSYNC**
+  * Warning script: run on a2 as gretina in ~/scripts: **./warningMessage4.sh **
+  * Check decomp stats  ** recordDecomp.sh | head -n50 **
+  * [[Flash digitizer firmware]]
+  * Check digitizer firmware version: on a2 or a1 terminal, type: **DIGSNIDFW** ,all digitizers should have same version firmware
+  * [[Replace digitizer with different color ones]]
+  * [[Replace fuses of digitizer]]
+  * [[No valid decomposed events]]
+  * Verify connecedt digitizers, at IOC interface, type **dbior**, it will print all identified digitizers within one bank
+  * VME related scripts are located at /global/devel/boot/vmeArray
+  * Check connected PVs, at IOC interface, type "casr"
+  * [[ Move detectors to new Hole position ]]
-   /global/data1x/gretina:
+====== Reboot a2 ======
-   drwxrwxr-x  64 gretina users  4096 Sep 19  2011 CR-1
+  * If a2 is rebooted due to system failure, two scripts need to be brought up
-   drwxrwxr-x 528 gretina users 20480 Oct  4  2011 CR-2
+    * from ~gretina: nohup scripts/warningMessage4.sh &
-   drwxrwxr-x 264 gretina users 12288 Oct 26  2011 CR-3
+    * from ~gretina/scripts/watcherdir: nohup watcher &
-   drwxrwxr-x 182 gretina users  8192 Dec  3  2011 CR-4
+ The first is the alarm script that talks to users.  The second is responsible for two things: writing record{Counters,Decomp,Settings} in the current run directory and cleaning up cluster process issues (usually restarting broken processes) soon after starting or stopping runs.
-   drwxrwxr-x  12 gretina users  4096 Nov 16  2011 CR-5
-   drwxrwxr-x 200 gretina users  8192 Mar  5 20:22 CR-8
-   drwxrwxr-x 162 gretina users  8192 Oct 14  2011 ER-2
-   drwxrwxr-x 141 gretina users  8192 Aug 24  2011 ER-3
-   drwxrwxr-x 124 gretina users  4096 May 31  2011 ER-4
-   drwxrwxr-x 180 gretina users  8192 Jul 11  2011 ER-5
-   drwxrwxr-x  72 gretina users  4096 Dec 15 12:03 ER-6
-   /global/data1b/gretina
+  * Switch to a1
-.7T	CR-9
+    * If a2 cannot be brought back. Gretina DAQ can still run on a1. In the file ~/.profile , environment variable **DAQSERVER** needs changed to be a1.gam . This parameter is used to restrict gretina daq critical scripts to run on specific machine.
-==== File Structure on GRETINA cluster / files to be kept ====
-   Here offline decomp data gets stored:
-    /global/data1a/gretina/user1
-    /global/data1a/gretina/user2
-    /global/data1a/gretina/user2_1
-    /global/data1a/gretina/user4
-   Base + data to create them:
-   /global/data1a/
-   drwxrwxrwx  8 mario   bin   4096 Mar 27 12:52 q1a1
-   drwxr-xr-x  6 mario   bin   4096 Nov 24  2010 q1a3
-   drwxrwxrwx  9 mario   bin   4096 Mar 27 12:53 q1b1
-   drwxr-xr-x  7 mario   bin   4096 Mar 27 12:53 q1b2
-   drwxr-xr-x  9 mario   bin   4096 Mar 27 12:55 q2a5
-   drwxr-xr-x  9 mario   bin   4096 Mar 27 12:57 q2a6
-   drwxrwxrwx  7 mkp     bin   4096 Mar 27 13:01 q2b4
-   drwxr-xr-x  7 mkp     bin   4096 Mar 27 13:03 q2b6
-   drwxr-xr-x  5 mario   bin   4096 Mar 27 13:05 q3a14
-   drwxr-xr-x  6 mario   bin   4096 Mar 27 13:06 q3a7
-   drwxr-xr-x  5 mario   bin   4096 Mar 27 13:08 q4a4
-   drwxr-xr-x  5 mario   bin   4096 Mar 27 13:09 q4a8
-   drwxr-xr-x  5 mario   bin   4096 Mar 27 13:11 q4b7
-   drwxr-xr-x  6 mario   bin   4096 Mar 29 14:00 q4b8
-   /global/data1b/
-   drwxr-xr-x  5 mario   bin   4096 Mar 27 14:26 q3b14
-   drwxr-xr-x  5 mario   bin   4096 Mar 27 14:27 q3b5
-   drwxr-xr-x  5 gretina bin   4096 Mar  6 18:07 q5a10
-   drwxr-xr-x  5 gretina bin   4096 Mar  6 18:17 q5a12
-   drwxr-xr-x  5 gretina bin   4096 Mar  7 13:14 q5b10
-   drwxr-xr-x  5 gretina bin   4096 Mar  6 18:27 q5b3
-   drwxr-xr-x  5 gretina bin   4096 Mar 27 14:29 q6a15
-   drwxr-xr-x  5 gretina bin   4096 Mar 27 14:29 q6a3
-   drwxr-xr-x  5 gretina bin   4096 Jun 10  2011 q6b11
-   drwxr-xr-x  5 gretina bin   4096 Jun 10  2011 q6b9
-   drwxr-xr-x  3 gretina bin   4096 Mar 27 14:31 q7a11
-   drwxr-xr-x  5 gretina bin   4096 Mar 27 14:32 q7a9
-   drwxr-xr-x  5 gretina bin   4096 Mar 27 14:33 q7b13
-   drwxr-xr-x  5 gretina bin   4096 Mar 27 14:33 q7b15
-G	DNLapril2012:   DNL data of digitizers
-====== Status 5/28/2012 ======
-__Channels:__
-  * Q4P2ε1 - grounded in the detector
-  * Q6P2ε3 - FET/preamp broken
-  * Q7P3φ5 - gain 1/10 - broken wire or bad contact in the detector - to be further tested
-__Radial boxes:__
-  * SN 005207 - over current
-  * SN 005222 - over current
-Spares available: 3
-__Digitizers:__
-  * SN 067h - errors on bits 9 and 10 with rate >100 kHz
-  * SN 02Eh - errors on bit 12 with rate ~4 kHz
-  * SN 097h - the card is blowing the fuse for the 5V
-Spares available: 1 (blue)
-====== Configuration files for decompostion ======
-The configuration for the decomposition is here: https://wikihost.nscl.msu.edu/gretina/doku.php/daq:decomp
-====== Positioning of the quads ======
-When a position of a detector is changed the following has to be updated:
-  * CS_DataId in https://wikihost.nscl.msu.edu/gretina/doku.php/daq:decomp
-  * CS_GblId in /global/devel/boot/vmeArray/vme*.cmd --- The Id is given by  hole_number * 16 + position_in_quad * 4 + board_number
-  * GTSort_shack/DetNum.dat --- self explanatory

Trace:

Differences

Search

Toolbox

QR Code