Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
daq:daq [2012/07/10 10:24] weisshaa [Documentation] |
daq:daq [2023/01/09 09:17] weisshaa [Misc 2019] |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | GRETINA DAQ system | + | ======= New in 2022 ====== |
| + | start run window is obsolete. Two scripts are available for changing the data directory. Daq needs to be stopped, directories need to exist: | ||
| + | * changeDataDir_maintainRunNum <data dir> : keeps the Run number the same, for when we need to move physics experiment data collection to another disk | ||
| + | * changeDataDir_resetRunNum <data dir> : finds the lowest available Run number without any larger RunDir #s | ||
| - | ====== Changelog ======== | ||
| - | ANY change to the DAQ system out here: [[:daqchange|daqchange]] | ||
| - | **NOTE**: No change pass July 13th 2012 can be done without explicit | ||
| - | announcement and approval (by Dirk). | ||
| + | ======= This is DAQ page from previous campaigns ====== | ||
| + | The DAQ page from the former S800-GRETINA campaign in 2012 can be found at | ||
| + | https://wikihost.nscl.msu.edu/gretina/doku.php/daq:daq_2012 | ||
| - | ====== issues ======== | + | * S800-Gretina control [[docsS800Grt|docsS800Grt]] |
| - | ANY issue/breakdown put here: [[:daqtrouble|daqtrouble]] | + | * {{ :daq:ulm-e16011_names.png?linkonly |S800 Trigger GUI}} |
| + | ======= Troubleshoot ====== | ||
| + | * S800-Gretina not correlated: Check CC setfile ~s800/converged_daq/Scripts/CC0105Begin.tcl for extsynch and extclock | ||
| + | * S800 is losing events. Check the network speed of spdaq45 by /sbin/ethtool eth0 and /sbin/ethtool eth1 , both should show speed as 1000Mb/s, if one shows 100Mb/s then the network is too slow and S800 cannot send data to GEB fast enough which will cause event loss happen. | ||
| + | * Check the ringbuffer status, $DAQBIN/ringbuffer status - -host=spdaq45 - -all , if the free colum becomes zero, DAQ related people needs to be notified for diagnostics. | ||
| + | ======= Decomp Information ====== | ||
| + | * [[easy_decomp_calibrations|Easy Gretina Decomp File Creation]] | ||
| + | * [[decomp_calibrations|Gretina Decomp Calibrations Explanation]] | ||
| - | ReadOutShell reports "S800 changed to inactive" [[:ReadOutShellS800Inactive|ReadOutShellS800Inactive]] | + | ======= Gretina Computing ======= |
| + | Gretina computer farm is maintained by LBNL computer group and local NSCL IT department. Nonetheless I put documents here, but we do NOT do anything to the GRETINA computers! | ||
| - | ====== start procedures ====== | ||
| - | * [[GRETINA:GRETINA]] | + | * May 2019, documentation provided from Jackie: [[https://docs.google.com/document/d/1Aq5NkuEKBc4_5fx-95d2RaSZM08VQwVleYWr42QTsFg/edit?invite=CNr_nogM&ts=5cd488d9|Gretina System Documentation]] |
| - | *[[s800daq:s800daq]] | + | * Instruction to shut down switches for NSCL power shutdown 12/5/2015 {{:daq:gretinaswitchesshutdown.pdf|}} |
| - | *[[source measurement:source measurement]] | + | |
| - | * S800 monitor [[https://groups.nscl.msu.edu/opdevtech/wiki/index.php/S800_DAQ_status_tool|S800mon]] | + | |
| - | ====== Documentation ====== | + | ======= NSCL GRETINA LaBr Array ======= |
| - | * NSCL DAQ general [[http://docs.nscl.msu.edu/daq]] | + | |
| - | * NSCL DAQ GRETINA (ReadOutShell scheme) [[http://docs.nscl.msu.edu/daq/gretinauserdocs.pdf]] | + | |
| - | * S800 DAQ [[https://groups.nscl.msu.edu/opdevtech/wiki/index.php/Main_Page#Electronics_and_DAQ]] | + | |
| - | ====== Trigger connection ====== | + | * [[fastscint_daq| FastScint DAQ Quick Start]] |
| + | * [[fastscint_daq_long | FastScint DAQ Details]] | ||
| - | * [[daq:triggerconnection|Trigger connection (Card 29)]] | + | ======= Misc 2019 ====== |
| + | * Dual homed NSCL machines are spdaq32 and spdaq07 | ||
| + | ====== miscellaneous ====== | ||
| + | * Validation/Trigger window width is set by Dig116_CS_X55WidthP, Dig116_CS_X55WidthN. N/P stands for positive/negative maximum difference relative to Trigger timestamp which will be read out. | ||
| + | * Bringing up just the EPICs screen: in gretina home **./startGRETINA_EPICSdisplay** | ||
| + | * Set trigger multiplicity: **caput Trig0_CS_FSCThr n** (n=0,1,2,3... for mult 1,2,3,4...) | ||
| + | * See trigger pulse width: **CheckLED.sh** | ||
| + | * Change trigger pulse width: **SETLEDWIN <# of 20ns ticks>** | ||
| + | * Check timestamps, report boards that are out-of-sync: **CheckTS** | ||
| + | * Force timestamps to reset, DO NOT USE DURING RUN!!!: **SINGLEIMPSYNC** | ||
| + | * Warning script: run on a2 as gretina in ~/scripts: **./warningMessage4.sh ** | ||
| + | * Check decomp stats ** recordDecomp.sh | head -n50 ** | ||
| + | * [[Flash digitizer firmware]] | ||
| + | * Check digitizer firmware version: on a2 or a1 terminal, type: **DIGSNIDFW** ,all digitizers should have same version firmware | ||
| + | * [[Replace digitizer with different color ones]] | ||
| + | * [[Replace fuses of digitizer]] | ||
| + | * [[No valid decomposed events]] | ||
| + | * Verify connecedt digitizers, at IOC interface, type **dbior**, it will print all identified digitizers within one bank | ||
| + | * VME related scripts are located at /global/devel/boot/vmeArray | ||
| + | * Check connected PVs, at IOC interface, type "casr" | ||
| + | * [[ Move detectors to new Hole position ]] | ||
| - | ====== Status ====== | + | ====== Reboot a2 ====== |
| - | [[:status|status]] | + | * If a2 is rebooted due to system failure, two scripts need to be brought up |
| + | * from ~gretina: nohup scripts/warningMessage4.sh & | ||
| + | * from ~gretina/scripts/watcherdir: nohup watcher & | ||
| + | The first is the alarm script that talks to users. The second is responsible for two things: writing record{Counters,Decomp,Settings} in the current run directory and cleaning up cluster process issues (usually restarting broken processes) soon after starting or stopping runs. | ||
| - | + | * Switch to a1 | |
| - | + | * If a2 cannot be brought back. Gretina DAQ can still run on a1. In the file ~/.profile , environment variable **DAQSERVER** needs changed to be a1.gam . This parameter is used to restrict gretina daq critical scripts to run on specific machine. | |
| - | ==== Files/trees on GRETINA cluster to go ==== | + | |
| - | (Only to be done by Dirk) | + | |
| - | + | ||
| - | /global/data1x/gretina: | + | |
| - | drwxrwxr-x 64 gretina users 4096 Sep 19 2011 CR-1 | + | |
| - | drwxrwxr-x 528 gretina users 20480 Oct 4 2011 CR-2 | + | |
| - | drwxrwxr-x 182 gretina users 8192 Dec 3 2011 CR-4 | + | |
| - | drwxrwxr-x 12 gretina users 4096 Nov 16 2011 CR-5 | + | |
| - | drwxrwxr-x 141 gretina users 8192 Aug 24 2011 ER-3 | + | |
| - | drwxrwxr-x 124 gretina users 4096 May 31 2011 ER-4 | + | |
| - | drwxrwxr-x 180 gretina users 8192 Jul 11 2011 ER-5 | + | |
| - | drwxrwxr-x 72 gretina users 4096 Dec 15 12:03 ER-6 | + | |
| - | + | ||
| - | /global/data1b/gretina | + | |
| - | 2.7T CR-9 | + | |
| - | + | ||
| - | ==== File Structure on GRETINA cluster / files to be kept ==== | + | |
| - | + | ||
| - | Here offline decomp data gets stored: | + | |
| - | /global/data1a/gretina/user1 | + | |
| - | /global/data1a/gretina/user2 | + | |
| - | /global/data1a/gretina/user2_1 | + | |
| - | /global/data1a/gretina/user4 | + | |
| - | + | ||
| - | Base + data to create them: | + | |
| - | /global/data1a/ | + | |
| - | drwxrwxrwx 8 mario bin 4096 Mar 27 12:52 q1a1 | + | |
| - | drwxr-xr-x 6 mario bin 4096 Nov 24 2010 q1a3 | + | |
| - | drwxrwxrwx 9 mario bin 4096 Mar 27 12:53 q1b1 | + | |
| - | drwxr-xr-x 7 mario bin 4096 Mar 27 12:53 q1b2 | + | |
| - | drwxr-xr-x 9 mario bin 4096 Mar 27 12:55 q2a5 | + | |
| - | drwxr-xr-x 9 mario bin 4096 Mar 27 12:57 q2a6 | + | |
| - | drwxrwxrwx 7 mkp bin 4096 Mar 27 13:01 q2b4 | + | |
| - | drwxr-xr-x 7 mkp bin 4096 Mar 27 13:03 q2b6 | + | |
| - | drwxr-xr-x 5 mario bin 4096 Mar 27 13:05 q3a14 | + | |
| - | drwxr-xr-x 6 mario bin 4096 Mar 27 13:06 q3a7 | + | |
| - | drwxr-xr-x 5 mario bin 4096 Mar 27 13:08 q4a4 | + | |
| - | drwxr-xr-x 5 mario bin 4096 Mar 27 13:09 q4a8 | + | |
| - | drwxr-xr-x 5 mario bin 4096 Mar 27 13:11 q4b7 | + | |
| - | drwxr-xr-x 6 mario bin 4096 Mar 29 14:00 q4b8 | + | |
| - | /global/data1b/ | + | |
| - | drwxr-xr-x 5 mario bin 4096 Mar 27 14:26 q3b14 | + | |
| - | drwxr-xr-x 5 mario bin 4096 Mar 27 14:27 q3b5 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Mar 6 18:07 q5a10 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Mar 6 18:17 q5a12 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Mar 7 13:14 q5b10 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Mar 6 18:27 q5b3 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Mar 27 14:29 q6a15 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Mar 27 14:29 q6a3 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Jun 10 2011 q6b11 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Jun 10 2011 q6b9 | + | |
| - | drwxr-xr-x 3 gretina bin 4096 Mar 27 14:31 q7a11 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Mar 27 14:32 q7a9 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Mar 27 14:33 q7b13 | + | |
| - | drwxr-xr-x 5 gretina bin 4096 Mar 27 14:33 q7b15 | + | |
| - | 384G DNLapril2012: DNL data of digitizers | + | |
| - | + | ||
| - | ====== Configuration files for decompostion ====== | + | |
| - | The configuration for the decomposition is here: https://wikihost.nscl.msu.edu/gretina/doku.php/daq:decomp | + | |
| - | + | ||
| - | ====== Positioning of the quads ====== | + | |
| - | When a position of a detector is changed the following has to be updated: | + | |
| - | * CS_DataId in https://wikihost.nscl.msu.edu/gretina/doku.php/daq:decomp | + | |
| - | * CS_GblId in /global/devel/boot/vmeArray/vme*.cmd --- The Id is given by hole_number * 16 + position_in_quad * 4 + board_number | + | |
| - | * GTSort_shack/DetNum.dat --- self explanatory | + | |
