Comparison of statistics taken with Q2 and Q6 in runs: data1x/MSUJune2012/Run252 ro Run271

On the scalers Q2 rate was 2.5 and Q6 rate 1.5 kHz.

These are the counts seen in the full quad in a 15 minutes acquisition (note
that 500 kB/s is the minimum allowed):

^ mode ^    readout limit  ^  Q2  ^ Q6 ^ deadtime ^
|validate | 500 |                 15M  | 8.5M |61%|
|validate | 700 |                1.3M | 14.5M|29%|
|validate | 1000 |              2.6M | 15.5M|29%|
|validate | 1500  |             0.8M | 15.8M|28%|
|validate | 2000   |            0.7M  | 13.5M|26%|
|TTCS     | 500     |            17.1M | 12.1M|
|TTCS     | 2000     |           21.5M|  17.8M|

This means that as we move from 500 we can lose more than 90%