The configuration files for all the decomposition processes are presently set by the script gretina@op3:scripts/setFile_Daq_S800 (https://wikihost.nscl.msu.edu/gretina/doku.php/daq:setfile_daq_s800)

Example for Q7P4:

• caputstr Det28_CS_Basis /global/data1b/q7a9/basis/basis_xt.dat

Awaiting the results of super-pulse measurement

• caputstr Det28_CS_DetMap /home/users/gretina/CR-param/detmap_020612/detmap_Q7pos4_CC09.txt

See https://wikihost.nscl.msu.edu/gretina/doku.php/daq:detmap

• caputstr Det28_CS_Filter /home/users/spaschalis/gretina_analysis/OnFrame/filter.txt

Consistency check - warning: loss of data between mode2 and mode3??

• caputstr Det28_CS_XtkPars /global/data1b/q7a9/basis/xtalk_pars_in.txt

Awaiting the results of super-pulse measurement

• caputstr Det28_CS_TrGain /home/users/gretina/CR-param/detmap_020612/tr_gain_Q7pos4_CC09.txt

Calibration of waveform. This file is produced by a code by Heather using for the segments a relative calibration to the CC

• caputstr Det28_CS_InData /global/data1x/gretina/ER-5/Run031/splitted/Global_59.dat

Input file used for debug, we can discard it.

• caput Det28_CS_Sender 10.0.3.28

IP number of the IOC

• caput Det28_CS_DataId 83

The ID is given by hole_number * 4 + position_in_quad