Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
daq:flash_digitizer_firmware [2019/11/27 17:28] jing |
daq:flash_digitizer_firmware [2020/07/07 13:56] jing |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| How to flash digitizer firmware: | How to flash digitizer firmware: | ||
| * Go to the IOC interface window and choose corresponding bank then type in the terminal: ls "*AA*" , do not miss the quotes | * Go to the IOC interface window and choose corresponding bank then type in the terminal: ls "*AA*" , do not miss the quotes | ||
| - | * find the script "flash.2.00_00AA_2.7us" or whatever Berkeley people asked the Type: <flash.2.00_00AA_2.7us , this should flash each of the 4 boards in the bank. Output with count up 1...14 | + | * find the script "flash.2.00_00AA_2.7us" or whatever Berkeley people asked the Type: <flash.2.00_00AA_2.7us , this should flash each of the 4 boards in the bank. Output with count up 1...13 |
| * to check it works, type: <verifyDig.2.00_00AA_2.7us , you should get succeeded for all 4 boards. | * to check it works, type: <verifyDig.2.00_00AA_2.7us , you should get succeeded for all 4 boards. | ||
| * load the FPGA, type: <fix | * load the FPGA, type: <fix | ||
