Sidebar
rxnnetworkex
This is an old revision of the document!
TALENT
Training in Advanced Low Energy Nuclear Theory: EXERCISES
Reaction Network Exercises
(Pre-Course Assignment)
Download, compile and run the Reaction Network Code
- Download the Reaction Network Code.
- Compile the code with your fortran90 compiler, following the instructions in doc/Compiling.txt in the XNet distribution.
- Report in the Reaction Network Code discussion thread your success with machine and compiler information.
- Read and set up code to run a first test problem, following the instructions in doc/Running.txt in the XNet distribution.
- Try various temperatures and densities in the th_const file.
(During-Course Assignment)
Run a reaction network with given nuclear input for:
- Fixed temperature and density
- Try various temperatures and densities
- Try different network sizes
- Swap out a reaction rate with a different version
- Vary initial composition (X, Y, Z or Ye)
- Let evolve until Nuclear Statistical Equilibrium is reached
- Temperature/density trajectories
- $ T(t) = T(0)\exp{(-t/\tau)} $ or $\ T(t) = T(0)(1+\frac{t}{n\tau})^{-n} $
- $ [1.+f_{\nu}(T(0))]\rho (t) = \rho (0) [1.+f_{\nu}(T(t))](T(t)/T(0))^3$
- How do initial conditions affect the resulting nucleosynthesis
- How does the trajectory form affect the results?
rxnnetworkex.1399864228.txt.gz · Last modified: 2014/05/11 23:10 by raph
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
Reaction Network Exercises Discussion
Installed and ran successful on my mac OS/X 10.7.5 using gfortran.
Compiled successfully on Arch Linux 3.14 with gfortran 4.9.
Warnings:
solve_bd.f90:81.51: If(tt.eq.t) pause 'stepsize zero in solve_bd' 1 Warning: Deleted feature: PAUSE statement at (1)Running on my Cygwin_NT 6.1 with gfortran 4.5.3.
Compiled and ran for me with Ubuntu 12.04.4 LTS and GNU Fortran 4.6.3
Compiled and ran on mac OS X 10.9.2 using gfortran 4.8.0.
Tip for other mac users: I had to run
xcode-select –installas I was missing -lcrt1.10.6.o. I think this should only be an issue if you've not run fortran codes previously on your machine (I'm blaming my recent OS upgrade).Compiled and ran on my Ubuntu 12.10 and gfortran 4.7
Compiled and ran on mac OS X 10.8.5 and gfortran 4.8
Compiled and ran successfully on Ubuntu 14.04 LTS with ifort 2013.
No pictures showed up. Probably need other tools. And no idea what the numbers are.
Any particular reason you are running the intel compiler?
Compiled and ran successfully on Mac OS X 10.9.2 using gfortran 4.9.0.
Compiled and ran successfully on Mint 16 and gfortran version 4.8.1
Compiled and ran successfully on Ubuntu with gfortran However no figure showed up. Also instead of ts1 it generated tso1.
Compiled and ran on Mac OSX 10.9 with gfortran 4.9.0.
Complied and ran on Mac OS X 10.9.2 with gfortran 4.8.0
It works on Ubuntu 13.10 with GNU fortran 95
Compiled and ran on Ubuntu 12 with ifort. Output files: ev1, net_diag1, tso1.
Compiled and Ran Successfully with gfortran 4.9.0 on Mac OS 10.9.2
I got this warning message when compiling:
If(tt.eq.t) pause 'stepsize zero in solve_bd' 1Warning: Deleted feature: PAUSE statement at (1)
Compiled and ran with gfortran 4.9.0 on Mac OS 10.9.3
I also got a tso1 (not ts1), which I can't read properly.
I should add that I got the following message while compiling::
Compiled and ran with MinGW using gfortran 4.8.1. Had issue with previous version of libgfortran-3.dll not being compatible with xnet.exe. Downloading new dll file fixed issue.
Compiled with gcc version 4.7.2 (Debian 4.7.2-5) on 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3 x86_64 GNU/Linux
Compiled with gcc 4.6.3 on Xubuntu 12.04 and it runs well.
Compiled successfully with gfortran 4.7.3 on Ubuntu 13.04
I compiled and ran successfully on Fedora 20, kernel 3.14.4 with gfortran 4.8.2 with no problems.
To generate the plot, one needs to use the script 'plot_time_mf_edot.m' in the tools/matlab directory.
Compiled successfully on Ubuntu 12.04 with gcc 4.6.3
Ran without a problem. Output looks good.
Compiled on my Mac OS X 10.7.5 using gfortran 4.8.2. Like some others, I get the following message while compiling:
solve_bd.f90:81.51: If(tt.eq.t) pause 'stepsize zero in solve_bd' 1 Warning: Deleted feature: PAUSE statement at (1)One of the files generated is tso1 instead of ts1. Successfully reproduced the plot using gnuplot.
@Donald Wilcox, I'm afraid I don't know the syntax for calling a matlab script, I read the script itself but the instructions were not clear enough. I graphed the output of ev1 using libreoffice and got the expected results. The tso1 file is unreadable by text editor, what format is it? As for the “Deleted feature” error everyone is getting, in the source file solve_bd.f90 there is a call to the operation PAUSE which is no longer included in the f95 standard. Thus it is a 'deleted feature'. I suspect that commenting out that line in that file (found in the /source directory) will eliminate the error, but I'm not brave enough to mess with the source code just yet.
Need to clarify the instructions. You'll have to generate the plot for yourself using the ev1 file.
Linux version 3.7.10-1.28-default, gcc version 4.7.2, ifort Version 11.0
Compiled successfully with gfortran