Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
|
Next revision
Both sides next revision
|
gas_handling_system [2017/01/22 16:56] pereira [Tracking Gas bottles pressures] |
gas_handling_system [2017/01/22 16:56] pereira old revision restored (2017/01/22 16:55) |
* Enter S3 vault and close main valves on [[#Preparation of gas bottles|gas bottles]]: P-10 for the [[Detectors#Ionization Chamber|ionization chamber]] (C<sub>4</sub>H<sub>10</sub>) and CF<sub>4</sub> (tetrafluoromethane) for the [[Detectors#Cathode Readout Drift Chambers (CRDC)|CRDCs]] | * Enter S3 vault and close main valves on [[#Preparation of gas bottles|gas bottles]]: P-10 for the [[Detectors#Ionization Chamber|ionization chamber]] (C<sub>4</sub>H<sub>10</sub>) and CF<sub>4</sub> (tetrafluoromethane) for the [[Detectors#Cathode Readout Drift Chambers (CRDC)|CRDCs]] |
| |
===== Replacing gas bottles ===== | ===== Tracking Gas bottles pressures ===== |
| In order to track the status of the gas bottles for the [[Detectors#Ionization Chamber|ionization chamber]], the [[Detectors#Cathode Readout Drift Chambers (CRDC)|CRDCs]], and the [[Detectors#[Tracking Parallel Plate Avalanche Counters (TPPAC)]|TPPAC]], it is possible to monitor their remaining pressures from Barney. Just open the **A1900** page, then **Tools**, and then **Gas Status**. The following window will be displayed: |
| |
| |
| |
| {{:wiki:gas-bottles-status.jpg?900|Barney display of pressures of all "supported" gas detectors in the lab}} |