Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
run:list [2012/06/23 08:19] weisshaa |
run:list [2012/06/23 08:20] weisshaa |
||
|---|---|---|---|
| Line 13: | Line 13: | ||
| ^ date ^ directory ^ run ^ Description ^ | ^ date ^ directory ^ run ^ Description ^ | ||
| - | | | data1a/MSUJune2012 | 7 | 60Co, d/s 1, 8000Mb/sec, 18% DT | | + | |
| - | ^ ^ ^ ^ ^ | + | |
| - | | 6/5/12 | data1a/MSUJune2012 | 10 | 5Mev range in mode 2+3, 60Co weak, d/s 10 | | + | |
| - | | | | 12 | 5MeV range in mode 2+3, 152Eu at center, d/s 10, BLR off | | + | |
| - | | | | 13 | 5MeV, mode 2+3, 152Eu center, d/s 5, BLR off | | + | |
| - | | | | 14 | mode 3 validate, 0.2us trace, 152Eu center, d/s 10, BLR off | | + | |
| - | | | | 15 | mode 3 validate, 0.2us trace, 152Eu center, d/s 10, BLR off, HEMIs closed! | | + | |
| - | | | | 16 | mode 2+3, 152Eu center, d/s 10, BLR off, HEMIs closed! | | + | |
| - | | | | 17 | mode 2+3, 60Co (weak) center, d/s 10, BLR off, HEMIs closed! | | + | |
| - | | | | 23 | mode 3 validate, 0.2us, 60Co (weak) center, d/s 10, BLR off, HEMIs closed! | | + | |
| - | | | | 24 | mode 3 validate, 0.2us, 60Co (weak) center, d/s 10, BLR off, HEMIs open! | | + | |
| - | | | | 25 | mode 2+3, 60Co (weak) center, d/s 10, BLR off, HEMIs open! | | + | |
| - | | | | 27 | mode 2+3, no source, d/s 1, BLR off, HEMIs closed! | | + | |
| - | ^ ^ ^ ^ ^ | + | |
| - | | 6/6/12 | data1a/MSUJune2012 | 28 | mode 2+3, no source, d/s 1, BLR off, HEMIs open! | | + | |
| - | ^ ^ ^ ^ FROM HERE ON S800 SYNCHRONIZATION SET UP WRONG (most likely) ^ | + | |
| - | | | | 59 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20, most likely S800 did run with internal clock since then -> no 'obvious' correlation | | + | |
| - | | | | 60 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | | | | 61 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | | | | 62 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | | | | 63 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | | | | 65 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | ^ ^ ^ ^ ^ | + | |
| - | | 6/7/12 | data1a/MSUJune2012 | 67 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | | | | 69 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20, fill during Run | | + | |
| - | | | | 70 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | | | | 71 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | | | | 72 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | ^ ^ ^ ^ ^ | + | |
| - | | 6/8/12 | data1a/MSUJune2012 | 73 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | | | | 108 | mode 2only Decomp 1-28, sendRaw 29 (TTCS) for LaBr, or Gretina | | + | |
| - | | | | 110 | mode 2only Decomp 1-28, sendRaw 29 (TTCS) for LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | ^ ^ ^ ^ HERE WE SET THE S800 SYNCHRONIZATION CHECK BUTTON PROPERLY ^ | + | |
| - | | | | 130 | mode 3 TTCS + LaBr, coinc or Gretina ds 50 or LaBr ds 20 | | + | |
| - | ^ ^ ^ ^ ^ | + | |
| - | | 6/9/12 | data1a/MSUJune2012 | 162 | mode 3 TTCS, or Gretina with ~ 1 MeV threshold, "Super Pulse" measurement, IOC of CRY#7 failed after 2 hours | | + | |
| - | | 6/10/12 | data1a/MSUJune2012 | 165 | mode 3 TTCS, or Gretina with ~ 1 MeV threshold, "Super Pulse" measurement, CRY#7 only | | + | |
| - | ^ ^ ^ ^ QUADS MOVED TO THE FINAL CONFIGURATION. Q2 and Q5 are not swapped any more ^ | + | |
| - | | 6/13/12 | data1x/MSUJune2012 | 171 | mode 3 Validate 0.2 us 60Co only Q1 Q2 Q3 with old positions | | + | |
| - | ^ ^ ^ ^ IOCs and decomps configured for the new position ^ | + | |
| - | | 6/14/12 | data1x/MSUJune2012 | 184 | mode 3 Validate 0.2 us 60Co with new positions | | + | |
| - | | | data1x/MSUJune2012 | 203 | mode 3 Validate 0.2 us 60Co 37GB -- BLR on -- analysis bug| | + | |
| - | | 6/15/12 | data1x/MSUJune2012 | 204 | mode 3 Validate 0.2 us 60Co 37GB -- BLR off| | + | |
| - | | | data1x/MSUJune2012 | 211 | mode 3 Validate 0.2 us 60Co 37GB -- BLR on (readout_limit 2000) -- scrap | | + | |
| - | | | data1x/MSUJune2012 | 240 | mode 3 Validate 0.2 us 60Co 37GB -- BLR on (readout_limit 500) | | + | |
| - | | 6/17/12 | data1x/MSUJune2012 | 252 | mode 3 Validate 0.2 us 60Co 15min -- readout_limit 100 (500)| | + | |
| - | | | data1x/MSUJune2012 | 253 | mode 3 Validate 0.2 us 60Co 15min -- readout_limit 200 (500)| | + | |
| - | | | data1x/MSUJune2012 | 254 | mode 3 Validate 0.2 us 60Co 15min -- readout_limit 300 (500)| | + | |
| - | | | data1x/MSUJune2012 | 255 | mode 3 Validate 0.2 us 60Co 15min -- readout_limit 500 | | + | |
| - | | | data1x/MSUJune2012 | 256 | mode 3 Validate 0.2 us 60Co 15min -- readout_limit 700 | | + | |
| - | | | data1x/MSUJune2012 | 257 | mode 3 Validate 0.2 us 60Co 15min -- readout_limit 1000 | | + | |
| - | | | data1x/MSUJune2012 | 258 | mode 3 Validate 0.2 us 60Co 15min -- readout_limit 1500 | | + | |
| - | | | data1x/MSUJune2012 | 261 | mode 3 Validate 0.2 us 60Co 15min -- readout_limit 2000 | | + | |
| - | | | data1x/MSUJune2012 | 270 | mode 3 TTCS 2 us 60Co 15min -- readout_limit 500 | | + | |
| - | | | data1x/MSUJune2012 | 271 | mode 3 TTCS 2 us 60Co 15min -- readout_limit 2000 | | + | |
| - | ^ ^ ^ ^ swap found in Q7P2 between signal cable 3 and 4 -- fixed ^ | + | |
| - | | 6/18/12 | data1x/MSUJune2012 | 298 | mode 3 Validate 60Co Q2 and Q5 -- 20us | | + | |
| - | | 6/19/12 | data1x/MSUJune2012 | 308 | mode 3 Validate 0.2 us 60Co -- Q2 in rotated position -> good resolution but P3a3| | + | |
| - | | | data1x/MSUJune2012 | 315 | mode 3 Validate 0.2 us 60Co -- Q6P2 fixed | | + | |
| - | | 6/20/12 | data1x/MSUJune2012 | 341 | mode 3 Validate 0.2 us 60Co -- test of North hemi - Q2P3a3 to be fixed | | + | |
| - | | | data1x/MSUJune2012 | 344 | mode 3 Validate 0.2 us 60Co -- calibration run 45min - check of north hemi | | + | |
| - | | | data1x/MSUJune2012 | 345 | mode 3 Validate 0.2 us 60Co -- calibration run - check of north hemi | | + | |
| - | | | data1x/MSUJune2012 | 346 | mode 3 Validate 0.2 us background run - checking dynamic range | | + | |
| - | |6/21/12 | data1x/MSUJune2012 | 383 | mode 3 Validate 0.2 us 60Co -- calibration of North hemisphere | | + | |
| - | ^ ^ ^ ^ changed ID position for the detectors ^ | + | |
| - | |6/21-22/12 | data1x/MSUJune2012 | 401 | mode 2 TTCS 2 us 60Co -- test of decomposition for northern hemi | | + | |
| - | | | data1x/MSUJune2012 | 404 | validate mode 0.2us 60Co -- test of northern hemi again | | + | |
| - | | | data1x/MSUJune2012 | 405 | validate mode 0.2us 60Co -- calibration of the southern hemi | | + | |
| - | | | data1x/MSUJune2012 | 408 | mode 2 - 2us 60Co -- Southern hemi - test of calib 1 | | + | |
| - | | | data1x/MSUJune2012 | 409 | mode 2 - 2us 60Co -- Southern hemi - test of calib 1 | | + | |
| ^ ^ ^ ^ New directory in use: /global/data1x/gretina/MSUTestBeam_June2012 ^ | ^ ^ ^ ^ New directory in use: /global/data1x/gretina/MSUTestBeam_June2012 ^ | ||
| | | data1x/MSUTestBeam_June2012 | 6 | mode 2 TTCS - 2us Background -- Full Gretina | | | | data1x/MSUTestBeam_June2012 | 6 | mode 2 TTCS - 2us Background -- Full Gretina | | ||
