HiRA Wiki

Ordered list of tasks for e14002:

prior to vault access:

1. Set up HiRA lab test setup
2. Test HINP 4 electronics
   • Integrate HINP4 readout code with NSCL DAQ (Kyle)
   • Edit spectcl for HINP 4
   • Pulser test MB1 (14 CBs)
3. Test CsI shaper/disc
   • Test 5 pico shaper/disc (16 channels each)
   • Confirm with WU/UCONN if first stage shaper gains need adjustment
4. Alpha Tests of HiRA E's
   • Determine if/which strips are broken
5. Test dE preamp box (e14009)
   • Determine if/which channels are broken
   • Work with WU to integrate ISEG bias
6. Retrieve pallets from offsite storage
7. Set up HiRA mount (outside of chamber) with dummies
   • locate missing pieces
8. Test HiRA target ladder
   • Work with Craig Snow to modify
9. Test/locate all internal cables with cable tester, remake/fix any lost or broken cables