electrostatic_calculations
Table of Contents
Electrostatic Calculations
We performed electrostatic calculation with Elmer FEM code to check the uniformity of the drift field in the field cage and look for potential sparking points.
Dimensions of the chamber
- 32 cm long
- 17cm diameter
Dimensions of the field cage
- 14 cm diameter
- 1.5 cm separation from the gas chamber
- 3 cm separation between cathote and the chamber
Characteristics of the cage
- Flexible Kapton field cage with copper electrodes printed on one side
- 83 equipotential strips (3 mm wide 0.5 mm gap)
- Drift field 200 V/cm
- Gating grid placed 2 cm above the MICROMEGAS detector
Electrostatic Potential and Drift Lines
Electrostatic Field and Drift Lines
Gating grid
- 65 Wires 100 um diameter
- 2mm pitch
- placed 1 cm from micromesh
- -200 V
Garfield Simulations
Gating grid off
Gating grid on 2mm pitch 20V
Gating grid on 2mm pitch 40V
Gating grid on 1mm pitch 20V
Gating Grid Transparency Calculation
PCB Electrodes field calculations
Calculation of the electrostatic field in the Anode electrodes, with and without an embedded electrode.
Results available in electrodes.pdf
electrostatic_calculations.txt · Last modified: 2016/08/30 13:21 by perezlou
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
