electrostatic_calculations
This is an old revision of the document!
Electrostatic Calculations
We performed electrostatic calculation with Elmer FEM code to chech the uniformity of the drift field in the field cage and look for potential sparking points.
Dimensions of the chamber
32 cm long
17cm diameter
Dimensions of the field cage
14 cm diameter
1.5 cm separation from the gas chamber
3 cm separation between cathote and the chamber
Characteristics of the cage
Flexible Kapton field cage with copper electrodes printed on one side
83 equipotential strips (3 mm wide 0.5 mm gap)
Drift field 200 V/cm
Gating grid placed 2 cm above the MICROMEGAS detector
electrostatic_calculations.1449077520.txt.gz · Last modified: 2015/12/02 12:32 by perezlou
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
