• Crate Configuration
• Inventory Modules
• Electronic Diagrams
• Documentation
• Trigger
  • Trigger schematic
    • Trigger box
    • Gate generation
    • Inspect channels
    • Busy Circuit
    • Time Stamping Scheme
  • Trigger module
    • CAMAC commands
    • Inputs and outputs
    • FPGA firmware
  • Time stamping
  • Configuration for S800 in tandem with other detectors
  • Begin sequence
  • Scalers and dead time

A preliminary scheme of the crate configuration (in progress) can be found here.

In progress.

• Main Electronic Diagram
• CRDC Schematic Electronic Diagram
• Ion Chamber Schematic Electronics Diagram
• Tracking PPAC Schematic Electronics Diagram
• Trigger Schematic Electronics Diagram
• Fast Timing Schematic Electronics Diagram

• Manuals for electronic modules
  • Manual for the XLM72V (Virtex FPGA) module
  • Manual for the VM-USB Wiener module
  • Manual for the CC-USB Wiener module
  • Manual for the ULM LeCroy 2367 module
  • Manual for the CFD LeCroy 612a module
  • Manual for the CFD LeCroy 4413 module
  • Manual for the Coincidence Register LeCroy 4448 module
  • Manual for the Scaler LeCroy 4434 module
  • Manual for the FERA LeCroy 4300b module
  • Manual for the Amplifier Tennelec TC241S module
  • Manual for the Logic Unit Phillips 755 module
  • Manual for the CFD Phillips 7186module
  • Manual for the ADC Phillips 7164H module
  • Manual for the ADC Phillips 7164 module
  • Manual for the TAC ORTEC 566 module
  • Manual for the HV Power Supply Canberra 3002D module
• Firmware FPGA Schematics
  • Trigger module firmware (ULM LeCroy 2367 )
  • Time stamping firmware (XLM72)
  • CRDC readout firmware (XLM72V)