User Tools

Site Tools


venting_pumping_vacuum_sections_in_s800

Venting/pumping vacuum sections in S800

Details about the Vacuum and Vacuum control system can be found here. During preparation of an experiment, some of the vacuum sections need to be vented/pumped due to different reasons (install/replace new detector, align target with telescope, etc.). In this section, we provide guidelines to vent/pump the different sections of the S800 beamline and spectrograph that are most frequently used.

venting_pumping_vacuum_sections_in_s800.txt · Last modified: 2023/02/13 14:45 by noji