The DAQ page from the former S800-GRETINA campaign in 2012 can be found at https://wikihost.nscl.msu.edu/gretina/doku.php/daq:daq_2012

• S800-Gretina control docsS800Grt
• S800 Trigger GUI

• S800-Gretina not correlated: Check CC setfile ~s800/converged_daq/Scripts/CC0105Begin.tcl for extsynch and extclock

• Easy Gretina Decomp File Creation
• Gretina Decomp Calibrations Explanation

Gretina computer farm is maintained by LBNL computer group and local NSCL IT department. Nonetheless I put documents here, but we do NOT do anything to the GRETINA computers!

• May 2019, documentation provided from Jackie: Gretina System Documentation
• Instruction to shut down switches for NSCL power shutdown 12/5/2015 gretinaswitchesshutdown.pdf

• FastScint DAQ Quick Start
• FastScint DAQ Details

• Dual homed NSCL machines are spdaq32 and spdaq45

• Validation/Trigger window width is set by Dig116_CS_X55WidthP, Dig116_CS_X55WidthN. N/P stands for positive/negative maximum difference relative to Trigger timestamp which will be read out.
• Bringing up just the EPICs screen: in gretina home ./startGRETINA_EPICSdisplay
• Set trigger multiplicity: caput Trig0_CS_FSCThr n (n=0,1,2,3… for mult 1,2,3,4…)
• See trigger pulse width: CheckLED.sh
• Change trigger pulse width: SETLEDWIN <# of 20ns ticks>
• Check timestamps, report boards that are out-of-sync: CheckTS
• Force timestamps to reset, DO NOT USE DURING RUN!!!: SINGLEIMPSYNC
• Warning script: run on a2 as gretina in ~/scripts: ./warningMessage4.sh
• Check decomp stats recordDecomp.sh | head -n50
• Flash digitizer firmware
• Check digitizer firmware version: on a2 or a1 terminal, type: DIGSNIDFW ,all digitizers should have same version firmware
• Replace digitizer with different color ones
• Replace fuses of digitizer
• No valid decomposed events
• Verify connecedt digitizers, at IOC interface, type dbior, it will print all identified digitizers within one bank
• Check connected PVs, at IOC interface, type “casr”

• If a2 is rebooted due to system failure, two scripts need to be brought up
  • from ~gretina: nohup scripts/warningMessage4.sh &
  • from ~gretina/scripts/watcherdir: nohup watcher &

The first is the alarm script that talks to users. The second is responsible for two things: writing record{Counters,Decomp,Settings} in the current run directory and cleaning up cluster process issues (usually restarting broken processes) soon after starting or stopping runs.

• Switch to a1
  • If a2 cannot be brought back. Gretina DAQ can still run on a1. In the file ~/.profile , environment variable DAQSERVER needs changed to be a1.gam . This parameter is used to restrict gretina daq critical scripts to run on specific machine.